58mm GPRS WiFi Wireless Thermal Printer with LCD Screen

58MM GPRS PRINTER CP-5889(without panel display) WIFI GPR S GPRS+LAN GPRS+LAN+USB CP-5899(without panel display) WIFI GPRS GPRS+LAN GPRS+LAN+USB This GPRS Printer can be applicable GSM850/900/1800/1900 MHz and also a highly platen removal mechanism, a standalone device no need to PC, can keep in...

58MM GPRS PRINTER
CP-5889(without panel display)
WIFI
GPRS   GPRS+LAN  GPRS+LAN+USB

图片8.jpg    图片9.jpg

图片10.jpg    图片11.jpg

CP-5899(without panel display) 

WIFI
GPRS   GPRS+LAN  GPRS+LAN+USB

图片12.jpg    图片13.jpg

图片14.jpg    图片15.jpg

This GPRS Printer can be applicable GSM850/900/1800/1900 MHz and also a highly platen removal mechanism, a standalone device no need to PC, can keep in memory up to 50 SMS; Can send out SMS if need, suit for restaurants print order that received from website dispatch and send advertising SMS, shopping on the internet, shopping on the internet and any other situation where SMS need to be sent to remote party.


INTRODUCTION:

Highlights          
Comunication mode :GPRS/Ethernet
Print mode :thermmo sensitive
Pressing the key and then printing a queue number
Replaceable paper
Parameters:
Power souce :   DC12V/3A
Storage temperature:-20~+80
Relative humidity :10%-95%
GSM frquency: GSM850/900/1800/1900MHz[optional]
Sensitivity: -102dBM
Transmitting power:<2w
Printing mode:thernisensitive
Width of printing paper :58mm
Valid printung paper: 48mm
Service life:50KM
Size 30*27*18cm
Weight :about 1.5kg
                                               
More details
Installation
1.Insert valid  SIM card into SIM card seat
(Support GPRS function. For better GPRS data transmission, suggest prohibiting all voice and SMS functions in this SIM card)
2. Install GSM antenna
3. Connect power  adapter
4. Switch on
   
GPRS/Ethernet Printer begins to initialize …

Keys OK
Modem OK
SIM Card OK
Registering…

It will take almost 20 seconds  to register. When registered successfully, GPRS Printer will try to connect server automatically.

Waiting….
Connecting to GPRS
Server

For the first use, When GPRS Printer try to connect server, please press Con/Disc key to stop. Because of you should set some parameters.

Disconnecting…

Settings
In the menu, you can make some settings through keyboard on GPRS Printer. When GPRS Printer stand by, press Menu key, you can enter into sub-menu.
Menu
GPRS APN
GPRS IP
GPRS Port
GPRS User Name
GPRS Password
Printer ID
Print Speed
Order Message
Date
Time
IMEI Code
Product Model
Restaurant Name
Restaurant Add
Restaurant Tel
Clear Settings
   
Settings for GPRS connection:
(1) GPRS APN:
1. In the sub-menu, press Up or Down key to move the cursor to GPRS APN, then press Menu key.
2. Press numeral keys (0key to 9key) to entry the letters; Press * key to insert symbols
3. Setting finished, press Back key to save and exit
Now, take CMNET.CN for example. CMNET.CN is the APN for china mobile.
1. In the sub-menu, press Menu key once
2. Press #key to capital letters. (ABC On the LCD, meaning capital letters)
3. Press 2key 3 times, C is ok;
Then, press 6key 1time, M is ok;
Then, press 6key 2 times, N is ok
Then, press 3key 2 times, E is ok
Then, press 8key 1 time, T is ok
Then, press *, then menu key, get the symbol of.  
Then, press 2key 3 times, C is ok
Then, press 6key 2 times, N is ok
4. Press Back key to save the settings and exit
Note: if wrong input, press Del key to delete the last letter
(2) GPRS IP:
1. In the sub-menu, press Up or Down key to move the cursor to GPRS IP, then press
Menu key.
2. Press numeral keys (0key to 9key) to entry the numbers; Press * key to insert symbols
3. Setting finished, press Back key to save and exit
Now, server IP address is 192.168.1.100.
1. In the sub-menu, move the cursor to GPRS IP, then press Menu key
2. Press # key to number. (123 On the LCD, meaning number)
3. Press 1key 1 time, 1 is ok;
Then, press 9key 1 time, 9 is ok;
Then, press 2key 1 time, 2 is ok
Then, press *, then menu key, get the symbol of.  
Then, press 1key 1 time, 1 is ok
Then, press 6key 1 time, 6 is ok
Then, press 8key 1 time, 8 is ok
Then, press *, then menu key, get the symbol of.  
Then, press 1key 1 time, 1 is ok
Then, press *, then menu key, get the symbol of.  
Then, press 1key 1 time, 1 is ok
Then, press 0key 1 time1, 0 is ok
Then, press 0key 1 time, 0is ok
4. Press Back key to save the settings and exit
Note: if wrong input, press Del key to delete the last number
(3) GPRS Port:
1. In the sub-menu, press Up or Down key to move the cursor to GPRS Port, then press Menu key.
2. Press numeral keys (0key to 9key) to entry the number
3. Setting finished, press Back key to save and exit
Now, GPRS Port is 23450.
1. In the sub-menu, move the cursor to GPRS Port, then press Menu key
2. Press # key to number. (123 On the LCD, meaning number)
3. Press 2key 1 time, 2 is ok;
Then, press 3key 1time, 3 is ok;
Then, press 4key 1 time, 4 is ok
Then, press 5key 1 time, 5 is ok
Then, press 0key 1 time1, 0 is ok
4. Press Back key to save the settings and exit
Note: if wrong input, press Del key to delete the last number
(4)Printer ID:
Normally, set the SIM card number as printer ID.
(5) GPRS User Name and GPRS Password:
For GPRS connection, User name and password is not a must in the most countries.
So call your GSM operator to confirm.
If User name and Password is a must in your country, please entry the related info,
Referencing to APN settings
For GPRS connection, APN, IP, Printer ID and Port is a must.
Settings for restaurant info:
Reference to APN setting, please set info of restaurant.
Restaurant Name, Restaurant Add and Restaurant Tel are in the sub-menu

TECHNICAL SUPPORT:

I Server sending data to print: 

Workflow diagram:
图片16.jpg     

Note:

The data between the first”*” and second “*” means order number,if there is no order number then the  printer  would not save the data.

If you want to print the spacing between two characters method, when sending data directly using "space notation" said.
printer  a behavior 24 English characters, if more than 24 characters will wrap
The maximum capacity of each packet GPRS  printer  4000 (2000 characters) bytes.
and  must be lowercase.
: S0: Fixed characters (uppercase letters); s (1-5): represents the font height; t (0/1): 0 means no bold, 1 bold.

Function of accept and refused added; order number + *

accept reminding / reject reminding*.This line would not be printed.

When you want this function it need to to choose mode of  order accept by hand

1.Not choose mode of order accept by hand

Server sending data: &!*XXXX*XXXX*XXXXXX*XXXX#
Note: 

symbol

Explanation

Note

&!    

data start symbol

*

Line change symbol

X

Accepting way

X=1:if the order over and no reminding sound then accept automatically.
X=0:If there is a reminding sound then It needs to press accept / reject button

XXX

Order number

*

Line change symbol

XXXX

Data content

*

Line change symbol


XXXXXX

Printing data

means this line to be printed as big letter


*

Line change symbol


XXXX

Two-dimensional code

means this line is Two-dimensional code


#

Data ending symbol


printer  reply 1:A*device ID*order number*AS04#
Explanation

Symbol

explanation

note

A

Fixed symbol

*

Fixed symbol

Device ID

Device ID number

*

Fixed symbol

Order number

Order number

AS04

Order accepted symbol

Fixed symbol

#

Ending symbol

Server reply 1:AS38*order number*X#
Explanation:

Symbol

explanation

note

AS38

Server received AS04 symnol

Fixed sybbol

*

Fixed sybbol

Order number

Order number

The first byte of the order number is useless

*

Fixed sybbol

X

0 or 1

0 means printed,1means not to print

#

Ending symbol

printer  reply 2: A*device ID*order number*AS05# 
Explanation:

Symbol

explanation

note

A

Fixed symbol

*

Fixed symbol

Device ID

Device ID

*

Fixed symbol

Order number

Order number

*

Fixed symbol

AS05

Accept order symbool

Fixed symbol

#

Ending symbol

Server reply 2: AS39*order number# 
 Explanation

Symbol

explanation

note

AS39

Server received AS05 symbol

Fixed symbol

*

Fixed symbol

Order number

Order number

#

Ending symbol

Example:Server sending data 

&!*12345*SSSSSS*ASDFHHHHH*DFDSFDADSDSDP*ABCDEFG*www.chsail.com#

Explanation

Symbol

explanation

note

&!    

Start symbol

*

Line changing symbol

1

Means accept automatically

2345

Means order number

*

Line changing symbol

SSSSSS
ASDFHHHHH 

Data content

Big letter symbol

DFDSFDADSDSDP

This line data need to be enlarged

*

Line changing symbol

This line need to be printed higher and larger

:fixed symbol
2:letter to be double higher
1:letter enlarge

ABCDEFG

This line need to be higher and larger

*

Line changing symbol

Two-dimensional code

www.abc.com

Two-dimensional code

#

Data ending symbol

Server reply1:A*88888888*2345*AS04#
Means device id with 88888888 received a order of 2345
Explanation:

Symbol

explanation

note

A

Fixed symbol

*

Fixed symbol

88888888

Device ID

*

Fixed symbol

2345

Order number

*

Fixed symbol

AS04

Order received

Fixed symbol

#

Ending symbol

Server reply 1:AS38*2345*0# means :order2345 canbe printed now
explanation:

Symbol

explanation

note

AS38

receive AS04Symbol

fixed symbol

*

fixed symbol

 order number

Order number

*

fixed symbol

0

可以打印

0indicates 打印

#

end symbol

printer  reply2:A*88888888* 2345*AS05# 
indicates ID 88888888  printer  accept order number is 12345

Note:

Symbol

Note

note

A

fixed symbol

*

fixed symbol

88888888

Device ID number

*

fixed symbol

2345

Order number

*

fixed symbol

AS05

 Accept this order

fixed symbol

#

end symbol

Server  reply2: AS39*2345*#  
Indicates Server received AS05 data ,order procedure finished.
Note:

Symbol

Note

note

AS39

Server received AS05Symbol

fixed symbol

*

fixed symbol

2345

Order number

#

end symbol

2.If you choose the mode of order accept by hand

e.g.:server sending data: 
&!*02345*SSSSSS*ASDFHHHHH*inpute delivery time pls:|inpute reject reason:*DFDSFDADSDSDP*ABCDEFG*www.abc..com#

Note :

Symbol

explanation

note

&!    

Start symbol

*

Line changing symbol

0

Means accept automatically

2345

Means order number

*

Line changing symbol

SSSSSS
ASDFHHHHH 

Data content

*

Line changing symbol

Fixed symbol

inpute delivery time pls:

Press accept and reminding accept content

Press accept and reminding accept content

|

Fixed symbol

inpute reject reason:

Press reject and reminding reject details:

Press reject and reminding reject details:

*

Line changing symbol

Capaslock sybbol

DFDSFDADSDSDP

Capaslock content

*

Line changing symbol

This line letter need to be enlarge

:fixed symbol
2:letter to be doublesize
1:letter enlarge

ABCDEFG

*

Line changing symbol

QR code symbol

www.abc.com

QR Code content

#

end symbol

Server reply1:A*88888888*2345*AS04#
Means device id with 88888888 received a order of 2345
Explanation:

Symbol

explanation

note

A

Fixed symbol

*

Fixed symbol

88888888

Device ID

*

Fixed symbol

2345

Order number

*

Fixed symbol

AS04

Order received

Fixed symbol

#

Ending symbol

Server reply 1:AS38*2345*0# means :order2345 canbe printed now
explanation:

Symbol

explanation

note

AS38

receive AS04Symbol

fixed symbol

*

fixed symbol

 order number

Order number

*

fixed symbol

0

Can be print

0indicates print

#

end symbol

printer  reply2:A*88888888* 2345*AS05# 
indicates ID 88888888  printer  accept order number is 12345
Note:

Symbol

Note

note

A

fixed symbol

*

fixed symbol

88888888

Device ID number

*

fixed symbol

2345

Order number

*

fixed symbol

AS05

 Accept this order

fixed symbol

#

end symbol

Server  reply2: AS39*2345*#  
indicates Server received AS05 data ,order procedure finished.
Note:

Symbol

Note

note

AS39

Server received AS05Symbol

fixed symbol

*

fixed symbol

2345

Order number

#

end symbol

Printer reply 3 : A*88888888*2345*0*xxxxxxx*AS44#
“O”means accept    “J” means reject
Means ID 88888888 printer accepted the order


Note:

Under the mode of order accept by hand,there would be a reminding info on screen when you pressed the accept or reject.the info content is *xxx/xxx. When  inpute finished,press“MENU ” to confirm.

Heart packet :heart  interval time is fixed as 30seconds。
Heart packet is used to make sure the connection of GPR S printer  with Server is normal or not。
GPRS printer  sending:
A*Device ID*X*AS01#      X=0/1   0indicates  normal 。1indicates NO PAPER
Server  reply: AS02#

printer “ normal ”Note:

Symbol

Note

note

A

fixed symbol

*

fixed symbol

Device ID

Device ID number

*

fixed symbol

0

 printer  normal

*

fixed symbol

AS01

 heart Symbol

fixed symbol

#

end symbol

printer “NO PAPER”Note:

Symbol

Note

note

A

fixed symbol

*

fixed symbol

Device ID

Device ID number

*

fixed symbol

1

 printer NO PAPER

Lack paper

*

fixed symbol

AS01

 heart Symbol

fixed symbol

#

end symbol

Example: printer  sending:A*88888888*0*AS01#     
indicates Device number “88888888”s  printer  upload heart information.
Note:

Symbol

Note

note

A

fixed symbol

*

fixed symbol

888888

Device ID number

*

fixed symbol

0

indicates  printer  normal

*

fixed symbol

AS01

 heart Symbol

fixed symbol

#

end symbol

printer  sending:*88888888*1*AS01#     
indicates Device number  “88888888”s  printer “NO PAPER”
Note:

Symbol

Note

note

A

fixed symbol

*

fixed symbol

88888888

Device ID number

*

fixed symbol

1

 printer “NO PAPER

*

fixed symbol

AS01

 heart Symbol

fixed symbol

#

end symbol

Server   reply Note:

Symbol

Note

note

AS02

 heart Symbol

fixed symbol

#

end symbol

3、check  printer  version  :
Server  sending:AS36*?#      
printer  reply:A*ID*XXXXX*AS36#

Server  sendingNote: 

Symbol

Note

note

AS36    

data Symbol

fixed symbol

*

fixed symbol

fixed symbol

#

fixed symbol

printer   reply Note:

Symbol

Note

note

A

fixed symbol

*

fixed symbol

Device ID

Device ID number

*

fixed symbol

XXXXX

 version  content

*

fixed symbol

AS36

fixed symbol

#

end symbol

Example:
printer  reply:A*123456*V1.2_DATE20140724 PCBV1.10_DATE20140722*AS36#  
indicates IDnumber  123456s  printer   version is:V1.2_DATE20140724PCBV1.10_DATE20140722
Note:

Symbol

Note

note

A

fixed symbol

*

fixed symbol

123456

Device ID number

*

fixed symbol

 version  content

V1.2_DATE20140724  PCBV1.10_DATE20140722

*

fixed symbol

AS36

fixed Symbol

#

end symbol

4、check IMEI code     Server  sending:  AS33*?#
printer  reply:A*ID*IMEI code *AS33#
Server  sendingNote: 

Symbol

Note

note

AS33    

fixed Symbol

*

fixed symbol

fixed symbol

#

fixed symbol

 printer   reply Note:

Symbol

Note

note

A

fixed symbol

*

fixed symbol

Device ID

Device ID number

*

fixed symbol

IMEI code

IMEI code

*

fixed symbol

AS33

fixed Symbol

#

end symbol

Example: printer  reply: A*123456*863158020430403*AS33#
indicates IDnumber  123456’s  printer  IMEI code is:863158020430403
Note:

Symbol

Note

note

A

fixed symbol

*

fixed symbol

123456

Device ID number

*

fixed symbol

IMEI code

863158020430403

*

fixed symbol

AS33

fixed Symbol

#

end symbol

5,Setting printing numbers,printing speed:
Setting  printer  orders  printer  numbers(at most 5pcs)
Printing speed(1indicates high;2indicates middle;3indicates low)    
Server  sending:  AS35*X,X#    
printer  reply:A*ID*X,X*AS35#
Server  sendingNote: 

Symbol

Note

note

AS35    

fixed Symbol

*

fixed symbol

X

 printer  numbers

X=1-5

fixed symbol

X

Printing speed

X=1-3

#

fixed symbol

printer   reply Note:

Symbol

Note

note

A

fixed symbol

*

fixed symbol

Device ID

Device ID number

*

fixed symbol

X

 printer  numbers

fixed symbol

X

Printing speed

AS35

fixed Symbol

#

end symbol

Example: printer  sending:
AS35*3,1*#   indicates Setting  printer  single  order printing 3pcs,printing speed 1(high).
Note:

Symbol

Note

note

AS35    

fixed Symbol

*

fixed symbol

3

single  order printing 3pcs

fixed symbol

1

Printing speed 

#

fixed symbol

printer  reply: A*123456*3,1*AS35#
indicates IDnumber  123456s  printer  already Setting  single  order printing 3pcs,Printing speed  high
Note:

Symbol

Note

note

A

fixed symbol

*

fixed symbol

123456

Device ID number

*

fixed symbol

3

single  order printing 3pcs

fixed symbol

1

Printing speed  high

AS35

fixed Symbol

#

end symbol

6、Setting  internet  parameter :Setting  printer IDnumber 、IP  or  domain name 、 port number     
Server  sending:  AS34*XX,IP,XX#    
printer  reply:A*ID*id,IP, port number *AS34#
Server  sendingNote: 

Symbol

Note

note

AS34    

fixed Symbol

*

fixed symbol

XX

 printer IDnumber

fixed symbol

IP

 printer IP add  or  domain name

fixed symbol

XX

打印 port number

#

fixed symbol

printer  reply Note

Symbol

Note

note

A

fixed symbol

*

fixed symbol

Device ID

Device ID number

*

fixed symbol

XX

 printer IDnumber

fixed symbol

IP

 printer IP add  or  domain name

fixed symbol

XX

port number

*

fixed symbol

AS34

fixed Symbol

#

end symbol

Example: printer  sending: AS34*88888888,183.17.45.208,23490#   
indicates Setting  printer s IDnumber  88888888,IP add  183.17.45.208, port number 23490
Note:

Symbol

Note

note

AS34    

fixed Symbol

*

fixed symbol

88888888

 printer IDnumber

fixed symbol

183.17.45.208

 printer IP add

fixed symbol

23490

打印 port number

#

end symbol

printer  reply: A*88888888*88888888,183.17.45.208,23490*AS34#
indicates  printer  already Setting  finished :
IDnumber  88888888;IP add  183.17.45.208; port number  23490
Note:

Symbol

Note

note

A

fixed symbol

*

fixed symbol

88888888

Device ID number

*

fixed symbol

88888888

 printer IDnumber

fixed symbol

183.17.45.208

 printer IP add  or  domain name

fixed symbol

23490

打印 port number

*

fixed symbol

AS34

fixed Symbol

#

end symbol

7、check  internet  sign   value     
Server  sending:  AS37*?#
printer  reply:A*ID*XX*AS37#   XX(00-31)indicates  sign   value , value  bigger  sign better
Server  sendingNote: 

Symbol

Note

note

AS37    

fixed Symbol

*

fixed symbol

fixed symbol

#

fixed symbol

printer   reply Note:

Symbol

Note

note

A

fixed symbol

*

fixed symbol

Device ID

Device ID number

*

fixed symbol

XX

 sign  强度 value

XX=00-31

AS37

fixed Symbol

#

end symbol

8、check  internet  Delay Status:  according to  reply speed then check internet  Delay Status。
Server  sending:  AS32*?#
printer  reply:A*ID*AS32#    
Server  sendingNote: 

Symbol

Note

note

AS32    

fixed Symbol

*

fixed symbol

fixed symbol

#

fixed symbol

printer   reply Note:

Symbol

Note

note

A

fixed symbol

*

fixed symbol

Device ID

Device ID number

*

fixed symbol

AS32

fixed Symbol

#

end symbol

Remote update Setting
Setting Remote update IP and  port number :
Server  sending:  AS40*IP*PORT#
printer  reply:A*Device ID*BOOT VERX.X*AS40#
Server  sendingNote: 

Symbol

Note

note

AS40    

fixed Symbol

*

fixed symbol

IP

Server IP add

this ip is only used for update

*

fixed symbol

PORT

Server  port number

this port number  only used for update

#

data  finished Symbol

printer   reply Note:

Symbol

Note

note

A

fixed symbol

*

fixed symbol

Device ID

Device ID number

*

fixed symbol

BOOT VERX.X

BOOT version  

*

fixed symbol

AS40

fixed symbol

#

end symbol

Example:
Server  sending:  AS40*183.17.45.208*56230#     
indicates Setting  printer s  update IP 183.17.45.208; port number  56230
Note: 

Symbol

Note

note

AS40    

fixed Symbol

*

fixed symbol

183.17.45.208

 update Server IP add

this ip is only used for update

*

fixed symbol

56230

 update Server  port number

此 port number  only used for update

#

data  finished Symbol

printer  reply:A**BOOT VER1.1*AS40#  
indicates IDnumber  88888888s  printer BOOT version   is :BOOT VER1.1
Note:

Symbol

Note

note

A

fixed symbol

*

fixed symbol

88888888

Device ID number

*

fixed symbol

BOOT VER1.1

BOOT version  

*

fixed symbol

AS40

fixed Symbol

#

end symbol

Printer Update

Update procedure:        

图片17.jpg

Note:
1.When undating,the storage of server sending data packet is 8000 bytes per packet
2. If the printer remind that accepting data incorrectly,the printer will connect with the updating server automatically.
If printer connected with the updating server 3 times incorrectly,the printer will connect with the server in use automatically

1、 Printer connecting reply: A*ID*printer version *BOOTv version*AS41# 

explanation

Symbol

explanation

note

A

Fixed symbol

*

Fixed symbol

ID

Device ID number

*

Fixed symbol

Printer version

BOOTversion

*

Fixed symbol

BOOT VER1.1

BOOT version

*

Fixed symbol

AS41

Fixed symbol

#

Ending symbol

EX:
Printer reply:
A*88888888*V1.4_DATE20150110  PCBV1.10_DATE20140722 LCD*BOOT VER1.1*AS41#
explanation

Symbol

explanation

note

A

Fixed symbol

*

Fixed symbol

88888888

Device ID number

*

Fixed symbol

V1.4_DATE20150110  PCBV1.10_DATE20140722 LCD

Printer version

*

Fixed symbol

BOOT版本

*

Fixed symbol

AS41

Fixed symbol

#

Ending symbol

2、The storage of server updating data packet reply: AS41*XXXX#

Symbol

explanation

note

AS41    

Fixed symbol

*

Fixed symbol

XXXXX

Updating data packet storage

Bytes

#

Data ending symbol

EX:server reply:AS41*66566#  represents updating data packet capacity:66566 bytes
Explanation:

Symbol

explanation

note

AS41    

Fixed symbol

*

Fixed symbol

66566

Updating data packet storage:66566 bytes

Bytes

#

Ending symbol

3、Printer reply:A*ID*XX*AS42#
 explanation:

Symbol

explanation

note

A

Fixed symbol

*

Fixed symbol

ID

Device ID number

*

Fixed symbol

XX

Server will send the xxx data packet

*

Fixed symbol

AS42

Fixed symbol

#

Ending symbol

EX:printer reply:A*88888888*01*AS42#
Explanation:

Symbol

explanation

note

A

Fixed symbol

*

Fixed symbol

88888888

Device ID number

*

Fixed symbol

01

Server will send the first data packet

*

Fixed symbol

AS42

Fixed symbol

#

Ending symbol

Printer reply:A*88888888*02*AS42#
Explanation:

Symbol

explanation

note

A

Fixed symbol

*

Fixed symbol

88888888

Device ID number

*

Fixed symbol

02

Server will send the second data packet

*

Fixed symbol

AS42

Fixed symbol

#

Ending symbol

4、After the printer updated packet finishes sending the data,it will reply: A*ID*Updata_ok*AS43#

Explanation:

Symbol

explanation

note

A

Fixed symbol

*

Fixed symbol

88888888

Device ID number

*

Fixed symbol

Updata_OK

Accepting ok

*

Fixed symbol

AS43

Fixed symbol

#

End symbol

Ex:When printer updated data packet finises sending,it will reply: A*88888888*Updata_ok*AS43# represents the printer ID88888888 finished accepting data
Explanation:

Symbol

explanation

note

A

Fixed symbol

*

Fixed symbol

88888888

Device ID number

*

Fixed symbol

Updata_OK

Accepting ok

*

Fixed symbol

AS43

Fixed symbol

#

End symbol

5、When the printer update data incorrectly,it will reply: A*ID*Updata_ERROR*AS43#

EX: rinter ata packet finish sending and reply: A*88888888*Updata_ERROR*AS43# it represents the printer ID 88888888 accepts data incorrectly

Explanation:

Symbol

explanation

note

A

Fixed symbol

*

Fixed symbol

88888888

Device ID number

*

Fixed symbol

Updata_ERROR

Accepting error

*

Fixed symbol

AS43

Fixed symbol

#

End symbol

Related Products